Figure 1 shows the Bean Sprout in a small pot. In general, the growth factor for any crops will be depending on water, humidity and fertilizer. With the correct amount, the crops are able to grow faster. Water Inlet (a) Humidity Indicator T 30 (b) (c) (d) Humidity Sensor High Valve 1 Medium Low Temperature, T(C) Bean Sprout Soil High Medium Low Valve 2 Pot Temperature Sensor Figure 1 Table 1 shows the parameters that need to be controlled for the Bean Sprout. Based on the table, the amount of water and fertilizer are corresponding to the time opening of the valve. The longer valve is open, the amount of water or fertilizer will be increased exponentially. High Fertilizer Inlet Medium Low Table 1: Parameters to Control the Growth of the Bean Sprout Humidity Water Fertilizer Low Medium High Temperature Indicator Low Medium High By using LED and Switch, invent the input and output of the system based on the parameters in Table 1. Example; LEDIRB0-High Level Switch1 - RD0 - Valve 1 for Water Outlet Construct the flowchart to control the parameters. Construct an assembly programming for the processes based on the flowchart in part (b). Write a summary from your code. (Method, special instruction sets, etc).