For an upcoming project, you want to use some fill material from a borrow pit. In its natural state, it has the following properties-Y-91.3 lb and w provided below: 3. : 10.1%. Data from Standard Proctor compaction tests for the material is Test Item 4 10.39 10.39 10.39 10.3910.39 Weight of mold + base plate (lb) Weight of mold + base plate + moist soil (Ib) Moisture content, w (%) 13.82 13.88 13.92 13.95 13.84 13.5 13.6 13.7 14.0 14.3 If the volume of fill required at the project site is 1,400 CY, and the specifications require the contractor to compact the fill material to at least 95 percent of the maximum dry density with a moisture content no less than the optimum moisture and no more than 4.0 percentage points above the optimum moisture, use the provided information to calculate: (12 pts.) b. c. d. OMC Minimum volume (in ft3) of borrow material required Amount of water needed (in gallons) to meet compaction specifications at the minimum volume of borrow For an upcoming project, you want to use some fill material from a borrow pit. In its natural state, it has the following properties-Y-91.3 lb and w provided below: 3. : 10.1%. Data from Standard Proctor compaction tests for the material is Test Item 4 10.39 10.39 10.39 10.3910.39 Weight of mold + base plate (lb) Weight of mold + base plate + moist soil (Ib) Moisture content, w (%) 13.82 13.88 13.92 13.95 13.84 13.5 13.6 13.7 14.0 14.3 If the volume of fill required at the project site is 1,400 CY, and the specifications require the contractor to compact the fill material to at least 95 percent of the maximum dry density with a moisture content no less than the optimum moisture and no more than 4.0 percentage points above the optimum moisture, use the provided information to calculate: (12 pts.) b. c. d. OMC Minimum volume (in ft3) of borrow material required Amount of water needed (in gallons) to meet compaction specifications at the minimum volume of borrow