I need a code for this problem in logixpro. A screenshot would be okay.

Your task is to develop the operational sequence to fill, heat, mix, and empty the Batch reactor utilizing the A-B-C selector to change reactor MODEs. Your system MUST function without starting a fire or overfilling the reactor MODE A: Fill the Reactor The operator must press and hold the START BUTTON for Pumps 1 and 2 to fill the tank . simultaneously . Shut down Pump 2 when it has placed '100gallons' in the tank and start the MIXER . Stop both Pumps if the reactor is 'Full' Once 'Full' RUN light should 'blink' on/off every '5 seconds' until mode B is selected MODE B: Heat and Empty the Reactor . When Mode Be is selected, automatically start the HEATER if the reactor is FULL .When the liquid reaches 55oF, Turn ON and latch the IDLE light to indicate that the reactor is empty When the reactor is ready to emptied, the operator must press the START BUTTON three times within '50' seconds to engage and latch Pump 3. . .Pump 3, the Mixer, and the Heater must shut off when the reactor is empty MODE C: Empty Bad Batch .When Mode C is selected, prevent all mechanical systems from operating EXCEPT pump 3 . To empty the tank the operator must Continuously hold the START button