Just need question 2 info from 1 is visible.

1. The standard enthalpy of formation for solid aluminum oxalate is -3397 kJ/mol a. Write the net ionic equation for the precipitation of aluminum oxalate that results from 2- containing sodium oxalate. (4 pts) an 3+ (aq) 13 C2 04 A12(C204) (aq) 943 (5) b. Calculate the standard enthalpy for this reaction. (4 pts) - 63.4 kJ/mol 2. The reaction described in problem #1 is the focus of a calorimetry experiment which generates the following data: - A dry coffee-cup calorimeter is weighed on a balance; its mass is 6.105 g - 25.0 mL of 2.19 M aluminum nitrate solution is added to the calorimeter, the mass of the calorimeter with this solution volume is measured to be 31.045 g. - 25.0 mL of 3.27 M sodium oxalate solution is mixed with the sodium phosphate solution already in the calorimeter, after a maximum temperature change is achieved, the mass of the calorimeter and its contents is measured to be 56.009 g. used on this data and the standard enthalpy of the reaction calculated in problem #1, determine e following for the values of density and specific heat, assume the aqueous solutions are pure ter): a. Calculate the amount of heat generated or absorbed by the reaction based on the moles of aluminum added to the calorimeter. (5 pts) b. Calculate the amount of heat generated or absorbed by the reaction based on the moles of oxalate added to the calorimeter. (5 pts) c. Given that the calorimeter is composed of styrofoam (specific heat is 1.13 Jg' C) and the initial temperature of the reaction mixture is 23.1C, calculate the final temperature of the reaction mixture after the maximum temperature change is achieved. (7 pts)