Methanol is produced at high pressure in carbonate and a synthesis water that enters the chapters of children's books. In the figure, the characteristics of the feed stream and feed stream for the process in which methanol production is carried out are given. The main features of the process can be summarized as follows: - Although the gas feed stream consists mostly of hydrogen and carbon dioxide, trace amounts of inert gases are available. > The converter can be thought of as an adiabatically operating reactor and the converter temperature can be increased to 400C has been set. > Pressure drops for all units are negligible. SRK method for estimating thermodynamic properties should be used. > The conversion depending on the operating pressure in the reactor is given in Table 1. > The temperature of the stream leaving the reactor is brought to the temperature Ts with a coolant before entering the separation column is brought. The purged current (purge) is targeted as 600kg/h. In Table 2, the data given is Ts 10C, Ps 17,5MPa. Simulate the system in CHEMCAD, taking into account report the characteristics of the stream and the states of all the process units used