model in simio
Part 1 Replace the parts leave block with an Inspection server where 30% of the parts gets rejected and 70% gets accepted. The processing time for the Inspection server is 5 minutes fixed. The updated sequence can be seen in table below. The accepted parts are sent to the holding area where all the processed parts are now held for 2 minutes before exit. (hint: Use "Delay" steps inside SIMIO processes) Failed Inspection Updated Sequence table: 3 Step Part 1 Part 2 Inspection Station A Station A Station A Station B Station C Station B Station B Station C Inspection Station C Inspection Inspection Part 3 Part 4 Part 2 From the 70% of the parts that got accepted, Part 1, 2 and 4 goes to Exit 1 and parts 3 goes to exit 2. Model this logic by using SIMIO add-on process as discussed in the lab. Before exit, all the parts are going through the holding area where they get held for 2 minutes before exit. Failed delay Exit Inspection Exit2 Part 1 Replace the parts leave block with an Inspection server where 30% of the parts gets rejected and 70% gets accepted. The processing time for the Inspection server is 5 minutes fixed. The updated sequence can be seen in table below. The accepted parts are sent to the holding area where all the processed parts are now held for 2 minutes before exit. (hint: Use "Delay" steps inside SIMIO processes) Failed Inspection Updated Sequence table: 3 Step Part 1 Part 2 Inspection Station A Station A Station A Station B Station C Station B Station B Station C Inspection Station C Inspection Inspection Part 3 Part 4 Part 2 From the 70% of the parts that got accepted, Part 1, 2 and 4 goes to Exit 1 and parts 3 goes to exit 2. Model this logic by using SIMIO add-on process as discussed in the lab. Before exit, all the parts are going through the holding area where they get held for 2 minutes before exit. Failed delay Exit Inspection Exit2