Modify it to implement the circuit described in part 1. The starter circuit should already have the following:

* The circuit should have four inputs: A, B, C, and D.

* The circuit should have two outputs: W and X.

You will need to modify it so that the following things are true:

* The output W should be a 1 if and only if there aren't two adjacent 1s in the inputs (i.e. A and B, B and C, or C and D).

* The output X should be a 1 if and only if there aren't two adjacent 0s in the inputs.

I would strongly recommend that you do not change the positioning, orientation, or attributes of the inputs and outputs. If you do, you may not be able to pass the tests.

For full credit, use as few gates as possible! You should be able to build your circuit with:

* 6 AND gates

* 2 OR gates

* 4 NOT gates

Please do not use any other type of gate. Using as few gates as possible will only be 0.5 points out of your score for this problem.

You may name your Logisim project whatever you'd like. However, the circuit itself (the item that appears under the topmost folder) must be called main

Outputs