Question
multi service over ip, 1. There are two network critical applications using a group of addresses and ports : From source addresses 150.20.100.1 to 150.20.100.63
multi service over ip,
1. There are two network critical applications using a group of addresses and ports : From source addresses 150.20.100.1 to 150.20.100.63 to destination address 150.20.200.1 using tcp with destination ports 26000 and 30000 which must be allocated 20% of the bandwidth of output interface fa 0/0 A real-time application from source address 150.20.100.100 to destination address range 150.20.30.32 to 150.20.30.63 using udp destination port 64000 which requires a bandwidth of 10% on the same interface.Create the necessary class maps and policy map and apply it to the interface to achieve the required results.
2- On a 155Mb/s serial interface we want to apply the policymap as shown: Policy-map policy 1 Class class1 Police cir percent 4 bc 100 ms pir percent 12 be 100 ms Conform-action transmit Exceed-action set-dscp-transmit af23 Violate-action drop If there is a long string of 1500 byte packets separated by 1 ms approximately how long will it take to go past the cir bc and reach the exceed state where packets are remarked. At 1 ms will the pir be ever be exceeded? If the 1500 byte packet string is separated by 0.5 ms estimate when the pir be will be exceeded and the violate action of drop be executed.
Step by Step Solution
There are 3 Steps involved in it
Step: 1
Get Instant Access to Expert-Tailored Solutions
See step-by-step solutions with expert insights and AI powered tools for academic success
Step: 2
Step: 3
Ace Your Homework with AI
Get the answers you need in no time with our AI-driven, step-by-step assistance
Get Started