Musich Corporation has an activity based conting system with three activity cost pools Machining. Setting Up, and Other The company's overhead costs, which consist of equipment depreciation and indirect labor, have been allocated to the cost pools already and are provided in the table below. Activity Cont Poole Haebining Betting Other Total Taperent depreciation 9,000 47,700 $2,400 780,100 Todirect labor 1.900 3,304 10,500 Total 912,900 350,400 27,360 3 90.600 >, Costs in the Machining cost pool are assigned to products based on machine hours ( Ms) and costs in the Setting up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Data concerning the two products and the company's costs appear below: Product 13 Prodotti 5,800 6.000 11,400 650 1,250 1.100 Balea (tal) Direct materials (total) Direct labor (total) Pro rodu $226,000 $253,500 $83,000 $9.200 #109,600 0104,200 Required: a. Calculate activity rates for each activity cost pool using activity-based costing b. Determine the amount of overhead cost that would be assigned to each product using activity based costing c. Determine the product margins for each product using activity based costing Compists this question by entering your answers in the tabs below. Required A Required B Required C Calculate activity rates for each activity cost pool using activity-based costing. (Round your Activity Cost Pools Machining Setting up Activity Rate per MH per batch Required A Required B Required C Determine the amount of overhead cost that would be assigned to each product using activity-based costing. (Roun Intermediate calculations to 2 decimal places.) Amount of Overhead Cost Product 23 Product T1 Required A Required B Required C Determine the product margins for each product using activity-based costing, (Round Intermediate calculations to 2 decimal places.) Product Margin Product Z3 Product T1