NET TECH lab Final project requirements The project should concern the implementation of a network with a certain complexity. It cannot be just one router with subnets. The network should consist of several different subnets (minimum 3). The used network devices into must be available in Cisco Packet Tracer. In the network can be running (configured) e.g. network services and technologies such as: DHCP, routing, vlan, NAT, IP packet tunneling, servers (e.g. ftp), connections links to the internet provider, etc. The project is implemented in Cisco Packet Tracer. 1. The project should have a personalized title: e.g. Network for a small troining company locoted in 4 rooms. 2. Describe the network proposed in the project in several sentences. Specify network devices and type of connections. (page 1, 3 of the report) 3. Prepare the IP address plan in individual networks (e-g. in the form of a table) (p. 2 of the report) 4. Show a diagram of the created network - screenshot. The diagram must include the addresses of interfaces of network devices and names (e.g. dhcp server), routers in the form of the R+ the number (e.g. RS) (use note) (p.4 of the report) 5. Give an example configuration of devices and services (relevant fragments from the router or server configuration file) (p. 5 of the report). In the case of pop-up configuration windows that appear, make sure that these windows do not cover the part of the network diagram that the configuration concerns. 6. Confirmation of the correct network configuration by testing the functioning of the network (commands: ping, sh ip route, ipconfig) (p. 6 of the report) 7. Final conclusions. Your comments. What has already been done and what else can be done (p. 7 of the report) 1.Project implementation area Here you indicote and describe the ploce where the project can be implemented. 2. Network address plan Here you insert the network and device addressing toble according to the formulo used in the laboratory. 3. List of devices used Use router type cisco 2811. 4. Logical diagram of the constructed network Pleose follow the schematic label (IP addresses of interfoces and networks description) os in the laborotory. A good description will make it eosier to configure the devices. Here you insert screenshot of CPT screen of the network. 5.Text description of device configuration with basic network components Here you describe router and server- interfoce and services configuration. You can insert o screenshot of device configuration here. 6.Test of the designed network. Confirmation of the results obtained (screenshots) You put screenshots here, e.g. ping, ip route, trocert