No thumbs up if it's not correct.

Jimmy works for Dynoworks and is tasked with a controlled explosion of 350 tons of dynamite. First, Jimmy must produce the nitroglycerine. Nitroglycerine (C3H5O3(NO2)3) is made by reacting glycerol (C3H3O3) with nitric acid (HNO3) in the presence of an inert component, sulfuric acid (H2SO4), according to the unbalanced reaction: C3H3O3+HNO3C3H5O3(NO2)3+H2O. The single feed to the reactor (not the fresh feed) is 182 tons/hr and is 48wt% glycerol, 35wt% nitric acid, and 17wt sulfuric acid. The single pass corversion of nittic acid is 0.63. The single stream exiting the reactor is passed through a separator into three streams, nitroplycerine exits as the product stream, water exits as a waste stream, and another stream containing the remaining components. 10\% of the stream exiting the separator containing sulfuric acid and nitric acid is purged. The recycle stream is mixed with a fresh feed of glycerol, nitric acid, and sulfuric acid. Calculate the following unknowns exiting the reactor. Component molar flow rate of glycerol = kmol/hr Component molar flow rate of nitric acid = kmol/hr Component molar flow rate of water = kmol/hr