Noter Configuration questions are only limited to RI, SW1, SW2, PCO, PCI, PC2 and PC3 Commands Parameters are key sensitive You must use the configuration laptop to configure the devices using console cable On R1 1. Change the hostname to be ROUTERI 2. Set the IP address on FastEthernet 0/0 to be the last usable IP Address of 192.168.11.0/27 and turn it on. 3. Set the IP address on FastEthernet 0/1 to be the last usable IP Address of 192.168.11.32/27 and turn it on 4. Set a banner (motd) to be "WELCOME" 5. Secure the Console Port with a password PASS123 6. Set enable password to be NOPASS 7. Enable Service Password Encryption 8. Save your configuration On SW1 1. Change the hostname to be SWITCHI 2. Set SVI IP on VLAN I to be 192.168.11.10 with the right subnet mask and turn it on. 3. Set the gateway address with the last usable IP address of 192.168.11.0/27 4. Save your configuration On SW2 1. Change the hosttime to be SWITCH2 2. Set SVI IP on VLAN 1 to be 192.168.11.40 with the right subnet mask and turn it on 3. Set the gateway address with the last usable IP address of 192.168.11.32/27 4. Save your configuration On PCO 1. Set the Firstable IP Address 2. Set the proper subruet mask 3. Set the proper gateway address Ou PCI 1. Set the Second wable IP Address 2. Set the proper sobre mad Set the proper gateway address Ou PC2 4 Settle it able IP Address 3. Set the people weet 6. Set the proper ateway addrew Ow PC3 Wh the Second usable IP Addre 2. Set the proper subnet mask 3. Set the proper gateway address On PC2 4. Set the First usable IP Address 5. Set the proper subnet mask 6. Set the proper gateway address On PC3 1. Set the Second usable IP Address 2. Set the proper subnet mask 3. Set the proper gateway address imelo