Answered step by step
Verified Expert Solution
Question
1 Approved Answer
Packet Tracer - Configure DHCP on a Wireless Router Objectives Connect 3 PCs to a wireless router Change the DHCP setting to a specific network
Packet Tracer Configure DHCP on a Wireless Router
Objectives
Connect PCs to a wireless router
Change the DHCP setting to a specific network range
Configure the clients to obtain their address via DHCP
Background Scenario
A home user wants to use a wireless router to connect PCs All PCs should obtain their address automatically from the wireless router.
Instructions
Part : Set up the network topology
a Add three generic PCs
b Connect each PC to an Ethernet port to the wireless router using straightthrough cables.
Part : Observe the default DHCP settings
a After the amber lights have turned green, click PC Click the Desktop tab. Select IP Configuration. Select DHCP to receive an IP address from DHCP Enabled Router.
Question:
Record the IP address of the default gateway:
b Close the IP Configuration window.
c Open a Web Browser.
d Enter the IP address of the default gateway recorded earlier into the URL field. When prompted, enter the username admin and password admin.
e Scroll through the Basic Setup page to view default settings, including the default IP address of the wireless router.
f Notice that DHCP is enabled, the starting address of the DHCP range and the range of addresses available to clients.
Part : Change the default IP address of the wireless router.
a Within the Router IP Settings section, change the IP address to:
b Scroll to the bottom of the page and click Save Settings.
c If it is done correctly, the web page will display an error message. Close the web browser.
d Click IP Configuration to renew the assigned IP address. Click Static. Click DHCP to receive new IP address information from the wireless router.
e Open the web browser, enter the IP address in the URL field. When prompted, enter the username admin and password admin.
Part : Change the default DHCP range of addresses.
a Notice the DHCP Server Start IP Address is updated to the same network as the Router IP
b Change the Starting IP Address from to
c Change the Maximum Number of Users to
d Scroll to the bottom of the page and click Save Settings. Close the web browser.
e Click IP Configuration to renew the assigned IP address. Click Static. Click DHCP to receive new IP address information from the wireless router.
f Select Command Prompt. Enter ipconfig.
Question:
Record the IP address for PC:
Part : Enable DHCP on the other PCs
a Click PC
b Select Desktop tab.
c Select IP Configuration.
d Click DHCP
Question:
Record the IP address for PC:
e Close the configuration window.
f Enable DHCP on PC following the steps for PC
Part : Verify connectivity
a Click PC and select the Desktop tab.
b Select Command Prompt.
c Enter ipconfig at the prompt to view the IP configuration.
d At the prompt, enter ping to ping the wireless router.
e Enter ping to ping PC at the prompt.
f At the prompt, enter ping to ping PC
g The pings to all devices should be successful.
End of document
Step by Step Solution
There are 3 Steps involved in it
Step: 1
Get Instant Access to Expert-Tailored Solutions
See step-by-step solutions with expert insights and AI powered tools for academic success
Step: 2
Step: 3
Ace Your Homework with AI
Get the answers you need in no time with our AI-driven, step-by-step assistance
Get Started