Part 2 The first floor has an open lobby with a seating area and separate office area (see Figure 3), whereas the second floor has meeting rooms (see Figure 3), whereas the second floor has meeting rooms (see 4) Floors 1 and 2 are smaller than the upper floors (100 feet by 70 feet) because a parking garage is built around the outside of these floors The offices are server room on the first floor is for the university s residence hall administration, which manages all the universitys residence One design goal is to keep this network as separate as possible from the network in the rest of buildings to provide greater security Deliverables Your team was hired to design the network for this residence hall Design the LANs for each floor, the distribution layer backbone that will connect the different floors in the building, and the part of the network that will connect into the campus core backbone Draw where the network equipment would be placed (use the floor plans provided) Specify the products in your design and provide their cost and the total cost of the network There are two options for specifying product Option 1 is to use the generic LAN equipment list in Figure 5 Option 2 is to use CDW (www cdw com) to find LAN equipment If you use CDW, you must use only Cisco devices (to ensure quality) Figure 3 Management office Room Hallway ievatees Front Deslk upply Figure 4 Restaurant 0 C109 C10 Figure 3 Management office Room Hallway ievatees Front Deslk upply Figure 4 Restaurant 0 C109 C10

The Answer is in the image, click to view ...

Answered step by step

Verified Expert Solution

Link Copied!

Question

1 Approved Answer

Posted on Sep 24, 2024

Part-2 The first floor has an open lobby with a seating area and separate office area (see Figure 3), whereas the second floor has meeting

Part-2

The first floor has an open lobby with a seating area and separate office area (see Figure 3), whereas the second floor has meeting rooms (see Figure 3), whereas the second floor has meeting rooms (see 4). Floors 1 and 2 are smaller than the upper floors (100 feet by 70 feet) because a parking garage is built around the outside of these floors. The offices are server room on the first floor is for the university s residence hall administration, which manages all the universitys residence. One design goal is to keep this network as separate as possible from the network in the rest of buildings to provide greater security.

Deliverables

Your team was hired to design the network for this residence hall. Design the LANs for each floor, the distribution layer backbone that will connect the different floors in the building, and the part of the network that will connect into the campus core backbone. Draw where the network equipment would be placed (use the floor plans provided).
Specify the products in your design and provide their cost and the total cost of the network. There are two options for specifying product. Option 1 is to use the generic LAN equipment list in Figure 5. Option 2 is to use CDW (www.cdw.com) to find LAN equipment. If you use CDW, you must use only Cisco devices (to ensure quality).

Figure 3 Management office Room Hallway ievatees Front Deslk upply Figure 4 Restaurant 0 C109 C10 Figure 3 Management office Room Hallway ievatees Front Deslk upply Figure 4 Restaurant 0 C109 C10