Perform an Energy Flow Barrier Analysis (EFBA) on the attached incident in which a mechanic received 1^st and 2^nd degree burns while cutting a 2" line from an 18" manifold. Using the technique as described in the lecture, complete the analysis, and document your findings on a three-column worksheet like the one attached. Once that worksheet is completed, document your results on a HAZOP report with description of the hazard you identified in the EFBA, the causes, consequences, risk control, and recommendations for countermeasures. Also, include an Executive Summary where you will describe what you did, how you did it, why you did it, what you found and what you recommend. Please explain everything very efficiently.

Deliverables:

Page A - Executive Summary

Page B - Completed Three-Column Barrier Analysis Work Sheet

Page C - HAZOP report representing your complete analysis

Barrier Analysis worksheet

Hazards	Barriers	Targets

October 15, 2019 12:35 pm \begin{tabular}{|c|} Planning group develop s job plan for removal of 18 header \\ \hline \end{tabular} flange begins to leak while cutting 2nd bolt from line came down line to a deadleg and had not peen vented for steam mechanic receives lst and 2 nd degree burns on face but not on body Sketch of the system on which the mechanic was using a torch October 15, 2019 12:35 pm \begin{tabular}{|c|} Planning group develop s job plan for removal of 18 header \\ \hline \end{tabular} flange begins to leak while cutting 2nd bolt from line came down line to a deadleg and had not peen vented for steam mechanic receives lst and 2 nd degree burns on face but not on body Sketch of the system on which the mechanic was using a torch