Plano Products manufactures a wide variety of chemical compounds and liquids for industrial uses. The standard mix for producing a single batch of 100 liters of its biggest selling product is as follows. Input Chemical Chem-A Quantity (in liters) Cost (per liter) Total Cost $1,365 2,025 7711 Chem-B Chen-C $3,600 There is a standard 20 percent loss in liquid volume during processing due to evaporation. The finished liquid is put into 25-liter containers for sale. Thus, the standard material cost for a 25-liter container is $900.00 (- ($3,600 + 100 liters) 25 liters per container). The actual quantities of direct materials and the cost of the materials placed in production during September were as follows (materials are purchased and used at the same time). Quantity (in Input Chemical Chem-A liters). Total Cost 25,560 $ 824,248 Chen-B 42,900 1,272,320 Chen-C 29,548 98,000 1,348,220 $3,444,788 A total of 9,500 containers (237,500 liters) were produced during September. Required: Calculate the total direct material variance for the liquid product for the month of September and then further analyze the total variance into: a. & b. Materials price and efficiency variances and materials mix and yield variances. (Do not round intermediate calculations. Round "Standard mix values" to 3 decimal places. Indicate the effect of each variance by selecting "F" for favorable, or "U" for unfavorable. If there is no effect, do not select either option. Enter your answers rounded to the nearest whole number.) Direct Material Input Chemical Chem-A Mix Variance Yield Variance Efficiency Variance Purchase Price Variance Chem-B Chem-C Total