PLEASE ANSWER THE 3 QUESTON BELOW 1. Write the microoperations in the Indexed cycle to implement indexed addressing. 2. Write the conditions for each microperation. Assume that in the indexed cycle PQ=11. 3. Draw the circuit. Assume that the bus select logic selects the registers for the bus according to the following table. I DONT WANT C CODE

In this assignment you will design hardwired control to implement indexed addressing. An instruction using indexed addressing has an offset, which is added to the index register value in order to calculate the effective address (EA). Ex: ADD 100, X If index register IX contains 50, EA is calculated as 150. EA offset + IX You will design an "Indexed stage in the instruction execution cycle. Fetch Indirect Indexed Execute Assume that the microoperations in the fetch cycle are as follows: P'.Q .t0: MAR PC P'.Q .tl: MBR Memory, PC PC+1 P.Q'.12: IR MBR In the Indexed cycle, effective address must be calculated. At the end of the indexed cycle, effective address must be stored to the address field of the instruction register (IR(addr)), so that the same execute routines can be used. Ex: ADD 100, X opcode addr IR after Fetch cycle: ADD 100 Index register IX contains: 50 Effective address calculation: EA IR (addr) + IX IR after Indexed cycle: ADD 150 1. Write the microoperations in the Indexed cycle to implement indexed addressing. 2. Write the conditions for each microperation. Assume that in the indexed cycle PQ=11. 3. Draw the circuit. Assume that the bus select logic selects the registers for the bus according to the following table. S2 S1 SO Encoder Select 001 010 011 100 101 110 x1 x2 x3 x4 x5 X6 PC IR MAR MBR AC IX