Please explain each answer briefly

i) In the following application the "start" push button is wired as Normally Open, and "stop" push button as Normally Closed. "Left_L" and "Right_L" are proximity sensors mounted at 0 , and 180 degrees. The motor is at the centre point between two proximity sensors with a wiper mounted on its shaft. The default motor direction is anti-clockwise. "Direction" output reverses the direction of the rotation. The initial position of the wiper is at 90 degree. Network 2: Comment Evaluate each of the following statements as TRUE or FALSE: a) To start the motor "stop" button and "start" button have to be pressed. b) When "motor" starts, it will latch and hold to keep the "motor" running. c) The wiper swings between 0 , and 180 degrees continuously. d) The wiper swings between 180 , and 360 degrees continuously. e) If "Left_L" and "Right_L" are swapped in Network2, wiper swing position changes. i) In the following application the "start" push button is wired as Normally Open, and "stop" push button as Normally Closed. "Left_L" and "Right_L" are proximity sensors mounted at 0 , and 180 degrees. The motor is at the centre point between two proximity sensors with a wiper mounted on its shaft. The default motor direction is anti-clockwise. "Direction" output reverses the direction of the rotation. The initial position of the wiper is at 90 degree. Network 2: Comment Evaluate each of the following statements as TRUE or FALSE: a) To start the motor "stop" button and "start" button have to be pressed. b) When "motor" starts, it will latch and hold to keep the "motor" running. c) The wiper swings between 0 , and 180 degrees continuously. d) The wiper swings between 180 , and 360 degrees continuously. e) If "Left_L" and "Right_L" are swapped in Network2, wiper swing position changes