please solve asap. this question is power system protection related. thanks.

The system shown in Fig 23 of a transmission system and the positive and zero sequence impedances for the various elements are given in the figure. In addition, the following information are given: The CT ratio is 600/5 and the VT ratio is 1000/1 The power transfer from Pance to Juanchito is 30.4MW and 13.2MVAR (5 marks): Determine the three zone settings (Zone 1 to 3) for the distance relay installed at the Pance Substation (at Bus 10) considering no current infeed effect. b. (3 marks) : Check if whether the maximum load will encroach into zone 3 mho characteristic? C. (1 marks): If a directional impedance characteristic is used, what will be the appropriate setting for the directional unit? Juanchito 115 9) Juanchito 220 11.95/90.0 2 0.712 /82.90 2 220 kV (10) Pance 115 14) Melendez 115 5.92 /80.47 2 Z1 = 7.21 /80.50 2 Zo = 36.95/75.66 2 115 kV 115 kV 17) Candelaria 115 8.07/68.7112 18 Diesel 115 115 kV 5 Yumbo 115 115 kV 6.79/80.59 2 115 kV 115 kV Figure Q3 The system shown in Fig 23 of a transmission system and the positive and zero sequence impedances for the various elements are given in the figure. In addition, the following information are given: The CT ratio is 600/5 and the VT ratio is 1000/1 The power transfer from Pance to Juanchito is 30.4MW and 13.2MVAR (5 marks): Determine the three zone settings (Zone 1 to 3) for the distance relay installed at the Pance Substation (at Bus 10) considering no current infeed effect. b. (3 marks) : Check if whether the maximum load will encroach into zone 3 mho characteristic? C. (1 marks): If a directional impedance characteristic is used, what will be the appropriate setting for the directional unit? Juanchito 115 9) Juanchito 220 11.95/90.0 2 0.712 /82.90 2 220 kV (10) Pance 115 14) Melendez 115 5.92 /80.47 2 Z1 = 7.21 /80.50 2 Zo = 36.95/75.66 2 115 kV 115 kV 17) Candelaria 115 8.07/68.7112 18 Diesel 115 115 kV 5 Yumbo 115 115 kV 6.79/80.59 2 115 kV 115 kV Figure Q3