PROCESS Coca-Cola Beverages Florida (Coke Florida), LLC is one of the biggest bottlers and distributors of the Coca-Cola Company's products in the United States (Coke Florida, n.d). The business entity was established in 2015 in Tampa, Florida. Nowadays, it manufactures, bottles, and distributes more than 600 types of sparkling, water, tea, juice, and coffee products of The Coca Cola Company (The Coca-Cola Company, n.d.). Its product line includes beverages like Coca-Cola, Sprite, Fanta, Fuze Tea, Hubert's Lemonade, Monster adrenaline drink, etc (Coke Florida, n.d.). Coke Florida manufactures its PET plastic bottle caps by using an injection molding process (Coke Florida, n.d.). The process begins with the preparation and heating of the PET mix of the required color (Caprite Australia, 2020). The resulting mix is put into the barrel of the injection machine by the suction machine. Next comes the clamping phase, during which two halves of steel molds are pressed together (Canvard Packaging International Co.,Ltd, n.d.). After that, the liquefied plastic is injected into the mold (Caprite Australia, 2020). During the dwelling phase, high pressure is applied to ensure that the PET mix covers every cavity in the molds and takes the intended form (Caprite Australia, 2020). The next stage consists of leaving the molds to cool off or using the cooling channels for the plastic to cool down and harden (Caprite Australia, 2020). After the remolding process bottle caps go through quality control to check for the deficiencies (Canvard Packaging International Co.,Ltd, n.d.). If bottle caps should have a brand name printed on them, they are put through the fast printing machine. After that final step, the bottle caps are ready to be used. Injection molding process is a highly cost effective method that ensures mass production of high quality output due to the repeatability of the process (Caprite Australia, 2020). Recommendations: Given the hypothetical state of the process, which you have illustrated above, what improvement recommendations could you offer to the process owner or operator? 4-5 bullet points