Project -A car on a ramp. Part A Solving an inclined plane problem Draw a free-body diagram A car of mass, M, =1000-kg car is on a rough ramp inclined at 0 - 20 above the horizontal. A light cord connects it over an ideal pulley at the top edge of the ramp to a hanging crate9 mass My. The cable pulls on the car parallel to the surface of the ramp. The coefficient of static friction between the Asphalt and the tires is 0.8, and the coefficient of kinetic friction is 0.7. What should be the crate's mass to start pulling the car up the ramp? Draw a free-body diagram: Show all the forces (such as the force of gravity, friction, normal force, and force of tension in the cord) acting on the car. O Show all the forces acting on the crate O Resolve the force of gravity to its components. 0 The free-body diagram should fill the whole page. Label all the force vectors. Write the formulas that apply to the problem on the second sheet of paper. O These formulas should match the force vectors on your sketch. O Derive a formula for the mass. O Substitute the given data in the problem to calculate the mass of the crate. Graphs and analyzing the graph: 2) Repeat the above calculation for the angles between the inclined ramp and the horizontal. Fill the table with your data 0 in degrees 20 30 40 50 60 Mass of the crate in kg Use the excel program to draw the graph of mass vs. the angle. Label the two axes and the title of the chart. Is the relationship linear or curvature? At what angle mass of the crate is the most? Describe the relationship between the angle and the mass of the crate