Question 1

Use the activity file provided by the examiner and follow the instructions given. You need to configure the topology as per the following instructions:

1. Configure 4 VLANs on designated switches namely, VLAN10, VLAN20, VLAN 30 and VLAN 40 2. Create trunk-ports on switches where necessary 3. Configure inter-vlan routing on routers using router on a stick method only on router 2. 4. Use static routing only between the routers 5. Configure Port-Fast where end devices are connected 6. Configure Etherchannel between 2 switches with redundant links 7. Make sure that all PCs can send and receive packets with each other. 8. Configure VTP on four switches in yellow region with 1 server (mentioned on switch) while rest of the switches should be configured with clients. Use the VTP parameters a. VTP Domain: iqra b. VTP Password: iqra123 9. Use the following IP Addresses on devices a. Router 0 i. Fa0/0 192.168.0.1/24 ii. Fa1/0 192.168.1.1/24 iii. Fa2/0.1 192.168.10.1/24 b. Router 1 i. Fa0/0 192.168.0.2/24 ii. Fa1/0 192.168.2.1/24 iii. Fa2/0.1 192.168.20.1/24 c. Router 2 i. Fa0/0 192.168.1.2/24 ii. Fa1/0 192.168.2.2/24 iii. Fa2/0.1 192.168.30.1/24 iv. Fa2/0.2 192.168.40.1/24

Rubrics (Scoring guide)

VTP = 20% STP bridge and related commands = 20% IP Address assignment = 30% Etherchannel = 10% Routing = 20%

YLAND Fall Folcho FOT PC2 192.168.0.2 WLAN 20 192.168.0.2 2 Fabio Foto Fas VO ht Router Switch Router2 PCO Server VAN 21 FOOD radi Swift Swife PCB Trolt Try od 01/1 Falt Mao Switch Switch PCI VLANO 192.168.0.2