question/ -3 Question 7 of 15 > 0.14/1 View Policies Show Attempt History Current Attempt in Progress In an effort to satisfy local demand for various fuels, a modest-sized blending operation is considering mixing pure ethanol with gasoline using various schemes. One calls for preparing four fuels: E100, which is pure ethanol; E85 which is 85.0 vol% ethanol and 15.0% gasoline; E10 which is 10. vol% ethanol and 90.0% gasoline, and pure gasoline (EO). An estimate of the market for these fuels indicates that 5.00% of the demand (by volume) is for E100, 20.0% for E85,35.0% for E10, and the remainder for pure gasoline (EO). Flowsheet Ethanol and gasoline enter the process. Which of the following process flowcharts best depicts the blending operation? In the diagrams, V is the combined volumetric flow rate of the four product fuels, VG is the volumetric flow rate of pure gasoline being fed to the process, and Vis the Question 7 of 15 0.14/1 TIL Component Material Balances If there is no change in volume upon mixing the fuels and if 1.00 x 105 liters/day of E10 is produced in addition to the other fuels, according to market demand), what are the volumetric flow rates of inputs of pure ethanol (Ve) and pure gasoline (Vc)? VE i x 105 liters/day VG x 10 liters/day Save for Later Attempts: 0 of 10 used Submit Answer Scale Up Tank trucks are to transport the fuel from the blending operation to service stations in the area. The gross weight of a loaded truck, which has a tare weight of 1.1700 x 104 kg, cannot exceed 3.6000 x 104 kg. We wish to determine the maximum volume of each fuel that can be loaded onto a truck. Assume that the truck carries all four fuel products in accordance with market demand. What is the cargo weight limit for the truck? i x 104 kg. Save for Later Attempts: 0 of 10 used Submit