SanJose3>enable SanJose3 #config t Enter configuration commands, one per line. SanJose3 (config)#ip access-list standard 50 SanJose3 (config-std-nacl) #exit SanJose3 (config)#exit SanJose3# End with CNTL/Z. %SYS-5-CONFIG_I: Configured from console by console SanJose3 #show access-list Standard IP access list 50 SanJose3 #config t Enter configuration commands, one per line. End with CNTL/Z. SanJose3 (config) #access-list 50 permit 10.0.0.0 255.0.0.0 SanJose3 (config)#exit SanJose3# %SYS-5-CONFIG_I: Configured from console by console SanJose3 #show access-list Standard IP access list 50 10 permit 0.0.0.0 255.0.0.0 SanJose3# cer 5.0 Beta Cluster1 Troubleshoot Task ISP cloud Se0/3/0 Topology 3 2nd last host address PC Fa0 Fa0 Fa0 PC0 Fa0 Fa0/1 PC1 ! Fa0/2 Company Webserver 200.200.100.254 Fa0/4 Fa0/2 192.168.1.161/27 Switch6 200.100.1.0/30 F Fa0/1 Switch0 CE Se0/1/0 fa0/0 200.200.100.1/24 Loo 149.11.1.0 200.200.2.1/30 Se0/0/1.1.1/30 f Fa0/0 Fa0/1 Fa0/3 HongKong Fa0/2 PC_C Swe 192.168.1.128/27 Fa0/1 Fa1/0 Se0/ Fa0/0 Se0/1 s0/- Fa0/1 10.10.2.0/2 Gig0/0 Sydney 179 16.32.0/28 Fa0/1 Fa0/3 Fa0 Sitcha Gian Fa0 ipv6 test area S0/1 S0/2 1 sig0/1 15S Se0/3 Seu/v.. 0/3 192.168.1.0/30 Fa0/0 SJ3 PC3 Gig0/0 Gig0/1 Fa0/24 s0/0 .5 192.168.1.4/30 10.10.1.0/24 Ch5 -1/2 Gig0/0 Gig0/1 SanJose2 192.168.1.8/30 Se0/0 Fa0/0 Singapore fa0/0 Fa0/1 inv test area Fa0/3 WILCHI Fa0/2 Fa0 IPv6Server Fa0 PC2 Fa0/3 Fa0/2 Fa0/1 Switch2 Fa0 Fa0/4 DNS/DHCP server 192.168.1.94/27 TFTP/Web Server Fa0 192.168.1.93/27 PC8 PC_A last host F Fa0 2 Fa0/4 Fa0 PC9 PC5 PC Fa0 Fa0/14 Fa0 G Gig0/1 Gig0 Gig0/2 Syd Sw1 Syd. Fa0/9 Fa0/4 Fa0/14 Fa0 Fa0 vlan 33 name Sales_team 10.10.33.0/24 ports 14 to 17 vlan 66 ! name Marketing team 10.10.66.0/24 ports 9 to 13 vlan 599 ! name Admin 10.10.199.0/24 ports 1 to 4 trunks int gi0/1, gi0/2 Fa0 PC7 PC6 PC B 11th host Syd_Server Sydney Wireless Router