Scenario: The ABC company has three offices. These offices include the main officer, Glebe

office and the office in Redfern. The Network Management System $($network manager$)$ is

located in the main office $($as shown in topology$).$ The network manager wants to monitor the

network in all three offices using Simple Network Management Protocol $($SNMP$).$ Consider

yourself as the network manager in the given topology and complete the implementation in

packet tracer by following these steps.

Please Note: Don't use the given network address in the topology create new ip addressess for all devices whatever you like and just mention it

at the end.

$*$ Use one of the dynamic routing protocols $($OSPF or RIPv$2)$ on all three routers and

make sure all the devices are able to ping one another. Verify the connectivity, record

the results

$*$Configure the SNMP settings on all the devices. $$Network Manager PC$$ will be used

as network management system, while all the other devices will be configured as

SNMP agents.

$*$Configure the SNMP agents $($routers and switches$)$ with the given community strings,

record the configurations in the report along with your reflections, $,$

a$.$ Routers: the SNMP community string for read$-$only mode will be $$rtr$123$R$$

and for read$-$write mode will be $$rtr$123$RW$$

b$.$ Switches: the SNMP community string for read$-$only mode will be $$sw$123$R$$

and for read$-$write mode will be $$sw$123$RW$.$

$*$Once$,$ SNMP manager and SNMP agents are configured, use the mib browser from

Network Manager PC to access all the SNMP agents $($all routers and switches$)$ and

observe which interfaces are in up and down modes. Record the results by taking the

screenshots.

You need to configure SNMP by using packet tracer with the below

information:

Topology:

Se$/0/0$

Se$0/0/1$

GLEBE$]$OFFICE

$192.$XX$.$X$5$

Show Image TranscriptYou need to configure SNMP by using packet tracer with the below

information:

Topology:

Network Management System

Network Manager