Select one from the tasks below: As a Muslim, during prayers, sometimes there is a situation of forgetting the raka'ah of prayer performed. To overcome this problem, you are asked to design a device that can remind the number of raka'ah of prayer. The design should contain PIC16F84A and a seven segment display to facilitate the monitoring process i. During the Covid-19 pandemic, one of the measures taken by the Malaysian government under movement control order (MCO) was to limit the number of visitors/customers entering the premises at one time in order to implement social distancing. For that purpose, focusing on small premises like grocery shop, convenience store etc., you are asked to design a device that can detect and subsequently notify the owner of the premises the current number of visitors in their premises. The design should contain PIC16F84A and a seven segment display to facilitate the monitoring process. The task need to be done in group consists of maximum five (5) persons. For each task, you are required to: The appearance of the device through drawing etc). il Construct the required electronic circuit in Proteus for the system. f. Construct the Flowcode program to control the system. iv. Simulate your designed system and writing the report. Your report should contain at least Abstract Introduction lii. Aim and objective iv. Scope and limitation Hardware requirement Vi. Description on required hardware vi. Design and implementation (explanation on how the proposed device will be installed and configured to do the monitoring process, circuit design, programming etc.) vii. Condusion IX References Submission of the assignment must include the main report, Proteus schematic capture file, Flowcode (fcf) file, e file (.c) and generated hex file by each member in your group (e.g. member la main report, member 2: c file, member 3schematic file, member 4: feffile, member S: hex file). For the main report, convert your report to pdf format (high quality). Minimum 1600 words are required for the report.