Shown in figure 1 is a plate structure subjected to a distributed membrane force. The plate has Young's modulus E=55MPa, Poisson's ratio v=0.3, and thickness t=4cm. (a) Write a computer program in any language and determine the stress distribution in the plate by dividing the plate into 20 elements shown in Figure 2. (b) Repeat part (a) using the ANSYS software and compare the two results. (c) Write a computer program, again, in any language for the case in which a beam element (20cm long, 4cm wide, and 4cm thick, E=55MPa ) is rigidly connected at the right end of the plate along the centerline, and simply supported at the right end. Note: ANSYS Result and graph And results and graph must needed