Sound Tek Inc. manufactures electronce stereo equipment. The manufacturing process includes printed oircult (PC) board assembly, final assembly, testing, and shipping. In the PC board assembly operation, a number of individuals are responsible for assembling electronic components into printed drcuit boards. Each operator is responsible for soldering components according to a given set of instructions, Operators work on batches of 45 printed circuit boards. Each board requires 5 minutes of board assembly time. After each batch is completed, the operator moves the assembled boards to the final assembly area. This move takes 10 minutes to complete. The final assembly for each stereo unit requires 15 minutes and is also done in batches of 45 units. A batch of 45 stereos is moved into the test bullding. Which is across the street. The move takes 20 minutes. Before conducting the test, the test equipment must be set up for the particular stereo model, The test setup requires 25 minutes. The units wait while the setup is performed. In the final test, the 45 -unit batch is tested one at a time. Each test requires 9 minutes. The completed batch, after all testing, is sent to shipping for psckaging and final shipment to customers. A complete batch of 45 units is sent from testing to shipping. The Shipping Department is located next to testing. Thus, there is no move time between these two operations. Packaging and fabeling requires 10 minutes per unvit. Required 1. Determine the amount of value-added and non-value-added lead time and the value-added ratio in this procest for an average stereo unit in a batch of 45 units. Round percentages to one decimal place. Categorire the non-value-added time into wait and move time