The Lowell Company uses a normal job-costing system at its Minneapolis plant. The plant has a machining department and an assembly department. Its job-costing system has two direct-cost categories (direct materials and direct manufacturing labor) and two manufacturing overhead cost pools (the machining department overhead, allocated to jobs based on actual machine-hours, and the assembly department overhead, allocated to jobs based on actual direct manufacturing labor costs). The 2017 budget for the plant is as follows: E (Click the icon to view the budget data.) Read the requirements. Requirement 1. Identify the components of the overview diagram of Lowell's job-costing system. Compute the budgeted manufacturing ovetead rate for each department. (Abbreviations used: Manuf. = manufacturing.) Machining Assembly B. } Choose from any drop-down list and then click Check Answer. Machining Department Assembly Department Manufacturing overhead 1,800,000 $ 3,800,000 Direct manufacturing labor costs 1,400,000 $ 2,000,000 Direct manufacturing labor-hours 150,000 240,000 240,000 Machine-hours 50,000 %24 %24 Read the requirements H. H. 1. Identify the components of the overview diagram of Lowell's job-costing system. Compute the budgeted manufacturing overhead rate for each department. 2. During February, the job-cost record for Job 494 contained the following: Machining Department Assembly Department Direct material used 42,000 $ 70,000 Direct manufacturing labor costs 18,000 $ 20,000 Direct manufacturing labor-hours 1,100 1,200 Machine-hours 2,700 1,000 Compute the total manufacturing overhead costs allocated to Job 494. 3. At the end of 2017, the actual manufacturing overhead costs were $2,100,000 in machining and $3,900,000 in assembly. Assume that 55,000 actual machine-hours were used in machining and that actual direct manufacturing labor costs in assembly were $2,100,000. Compute the over- or underallocated manufacturing overhead for each department