You need to do the followed: $1.$ Chose the IP$$s for the routers and use subnet $30,$ and write why we used that? $($write the IP addresses next to the interface$).-$ Use IP address X$\mathrm{.}0\mathrm{.}0\mathrm{.}0/30$ for example and change the X to be your last $2$ digit on your student ID$.2.$ Area number should mach of X except the one in area $0.$ EX if IP is $10\mathrm{.}10\mathrm{.}0\mathrm{.}0$ area should be area $10.$For LANs use $192\mathrm{.}168.$X$\mathrm{.}0$ change X to be the same as your area ID$.$ on area $2,$ the second VLAN X will be $($area ID $+4).3.$ For the LAN$$s: $1.$ LAN in area $3$ should have around $8000$ users.$($ chose the closest number to $8000$ users but not less than $8000$ users$).2.$ Lan in area $4$ should have $500$ users. $3.$ Area $2$ should contain two VLANs: $1.$ VLAN $1$ should be class C $2.$ VLAN $2$ should have $3000$ users. $4.$ LAN in area $1$ should have around $60000$ users. $4.$ Each LAN and VLAN should have DHCP service. $5.$ Use OSPF routing protocol with the areas shown on the figure.$($copy the commands on your report$)6.$ Use show command to show the next for router $12,$ router $17,$ router $14$: $-$ neighbors Area $2-$ database $-$ database summary. $7.$ Chose the area type carefully and write the reason why have chosen it for each area. $$ Area $1$ and $4$ has routers with small memory and lesser CPU. $8.$ Show the cost from router Router $14$ to Router $17$ and show all the paths. Define which one is shorter. Do Q$\mathrm{.}8$ with the default reference B$/$W and see if you have to change it$,$ Explain. Using cisco packet tracer step by ste