2) ADC Question for STM32F051R8T8 MCU a) Using the external xtal of 8Mhz, configure the necessary conditioning using the STM Cube Ide program to set the frequencies of 12MHz cpu, 3Mhz APB1 Timer Clocks and 6Mhz APB1 Peripheral Clocks. In response, share a photo from the Clock Configuration tab of the STM Cube Ide program. b) Write the blinking program code associated with the LDR connected to the PAO pin that can measure the ADC with 12-bit resolution and the 4 leds connected to the port pins from PC6 to PC9. The LEDs will light according to the voltage condition below. 1.LED 1-2 V 2.LED 2-3 V 3.LED 3-4 V 4.LED 4-5V 2) ADC Question for STM32F051R8T8 MCU a) Using the external xtal of 8Mhz, configure the necessary conditioning using the STM Cube Ide program to set the frequencies of 12MHz cpu, 3Mhz APB1 Timer Clocks and 6Mhz APB1 Peripheral Clocks. In response, share a photo from the Clock Configuration tab of the STM Cube Ide program. b) Write the blinking program code associated with the LDR connected to the PAO pin that can measure the ADC with 12-bit resolution and the 4 leds connected to the port pins from PC6 to PC9. The LEDs will light according to the voltage condition below. 1.LED 1-2 V 2.LED 2-3 V 3.LED 3-4 V 4.LED 4-5V