A power plant needs to evaporate 1750.0 lbm/h of water at 40.0F at 1 atm. Utility superheated steam at 1000 F and 40 bar is available, but the steam cannot drop below 20 bar and 600F. Physical Property Tables Specific Enthalpies Use the steam tables to determine the specific enthalpies of the four streams. The reference for the enthalpies should be water at the triple point. You may interpolate in Tables B6. and B.7, and can also use external, automated sources. Stream (Btu/lbm) with respect to water at the triple point Inlet water at 40.0F and 1 atm Outlet steam at 1 atm 1 Inlet steam at 1000 F and 40 bar Outlet steam at 600F and 20 bar eTextbook and Media Save for Later Attempts: 0 of 3 used Submit Answer Mass Flow Rate of Steam Determine the amount of superheated steam required to accomplish the evaporation for a superheated steam outlet of 600F and 20 bar. Assume no heat losses and use the steam tables to determine enthalpies. mg = i Ibm/h Save for Later Attempts: 0 of 3 used Submit