Formic acid (100\%) produced from biomass hydrolysis is a promising feedstock for the production of clean-energy sources of hydrogen. You are working for a company that produces hydrogen and your boss asks you to prepare a design project for a hydrogen synthesis plant which would be located close to your current plant site. Hydrogen synthesis plant is supposed to be only 295m away from the storage tank area of the formic acid and will have an attitude of 28m with respect to this plant. The storage tank, which is the start point of the pipeline, is being operated at 25C and 1.5atm. The volumetric flow rate of the formic acid is 6.1103m3/s. The storage tank, which is the end point of the pipeline is opened to the atmosphere. All of the piping is 2 in schedule 80 pipe. At this stage, you are expected to i) Decide on the material of pipes (Hint: Check corrosivity from the "Safety Data Sheet" for your chemical), ii) Decide on the type and number of valves and fittings, iii) Calculate the total frictional loss, iv) Decide on pump efficiency, v) Calculate the kW power needed for the pump. You must present a detailed sample-hand calculation in your report as well as an explicit diagram of your pipeline with all fittings and valves, etc. Your report should include: - Cover page - Statement of the problem - Method of calculations - Assumptions/decisions made - Hand calculation results - Discussion (Discussing the assumptions and decisions made)