I need help please :)thanks by the way
CTS1134 Assignment #1 DUE: June 14th, 2018 task to design a network for a new music store. The network will have a single internet provider. The iSP Demarc, the router and the 3 switches are installed inside the main office. Requirements 1. A small Office/Home Office router capable of 100 Mb interfaces. The router will serve as DNS and NTP servers for your internal local network. Label the router ID for easy identification and assign the IP gateway for each LAN inside the local network. These ports feed network signal to the switches. 2. You are allowed to use the IP public range of 172.16.0.0 to 172.31.255.255, Select the subnets that you would use in your network with a mask of 255.255.255.0 3. Three network switches will segment your traffic for 3 separate subnets (LANS). Label the switches for identification and documentation. 3 4. The front desk will have Z computers dedicated to the Point of Sale. Assign the proper IP address and label the physical port connecting to the switch. 5. A small computer courtyard with 4 computers to be used by your customers connecting on a single subnet. Assign the proper IP address and label the physical port connecting to the switch. These computers are only allowed to access the internet for HTTP and HTTPS traffic. You also need to allow TCP ports for DNS and NTP. Specify which ports need to be allowed. 6. The main office will also house the 2 servers. One for the store inventory and another server for accounting/sales information. Assign a Server Name and assign IP addresses to both servers. These servers should communicate only via SSH and RDP. Specify which ports need to be allowed. Submit you work Print and fill up the information in the diagram. You can submit the paper or scan/picture the work and submit it over email. (juan.sanchez@mdc.edu) completed CTS1134 Assignment #1 DUE: June 14th, 2018 task to design a network for a new music store. The network will have a single internet provider. The iSP Demarc, the router and the 3 switches are installed inside the main office. Requirements 1. A small Office/Home Office router capable of 100 Mb interfaces. The router will serve as DNS and NTP servers for your internal local network. Label the router ID for easy identification and assign the IP gateway for each LAN inside the local network. These ports feed network signal to the switches. 2. You are allowed to use the IP public range of 172.16.0.0 to 172.31.255.255, Select the subnets that you would use in your network with a mask of 255.255.255.0 3. Three network switches will segment your traffic for 3 separate subnets (LANS). Label the switches for identification and documentation. 3 4. The front desk will have Z computers dedicated to the Point of Sale. Assign the proper IP address and label the physical port connecting to the switch. 5. A small computer courtyard with 4 computers to be used by your customers connecting on a single subnet. Assign the proper IP address and label the physical port connecting to the switch. These computers are only allowed to access the internet for HTTP and HTTPS traffic. You also need to allow TCP ports for DNS and NTP. Specify which ports need to be allowed. 6. The main office will also house the 2 servers. One for the store inventory and another server for accounting/sales information. Assign a Server Name and assign IP addresses to both servers. These servers should communicate only via SSH and RDP. Specify which ports need to be allowed. Submit you work Print and fill up the information in the diagram. You can submit the paper or scan/picture the work and submit it over email. (juan.sanchez@mdc.edu) completed
