Mickley Corporation produces two products, Alpha6s and Zeta7s, which pass through two operations, Sintering and Finishing. Each of the products uses two raw materials-X442 and Y661. The company uses a standard cost system, with the following standards for each product (on a per unit basis): Raw Material Product Alpha6 Zeta7 X442 2.0 kilos Y661 1.5 liters Standard Labor Time Sintering Finishing 0.10 hours 3.0 kilos 2.5 liters 0.45 hours 0.80 hours 0.90 hours Information relating to materials purchased and materials used in production during May follows: Material X442 Y661 Purchases Purchase Cost Standard Price 14,800 kilos $ 66,600 15,800 liters $ 23,700 $ 4.30 per kilo $ 1.60 per liter Used in Production 9,300 kilos 13,800 liters The following additional information is available: a. The company recognizes price variances when materials are purchased. b. The standard labor rate is $22.00 per hour in Sintering and $21.00 per hour in Finishing. c. During May, 1,220 direct labor-hours were worked in Sintering at a total labor cost of $28,060, and 2,930 direct labor-hours were worked in Finishing at a total labor cost of $67,390. d. Production during May was 2,300 Alpha6s and 1,600 Zeta7s. Required: 1. Complete the standard cost card for each product, showing the standard cost of direct materials and direct labor. 2. Compute the materials price and quantity variances for each material. 3. Compute the labor rate and efficiency variances for each operation. Complete this question by entering your answers in the tabs below. Req 1 Req 2 Req 3 Complete the standard cost card for each product, showing the standard cost of direct materials and direct labor. (Round your answers to 2 decimal places.) Alpha6: Standard Quantity or Hours Standard Price or Rate Standard Cost