PA 7-6 (Algo) JCL Incorporated is a major chip manufacturing... JCL Incorporated is a major chip manufacturing firm that sells its products to computer manufacturers like Dell, Gateway, and others. In simplified terms, chip making at JCL Incorporated involves three basic operations depositing, patterning, and etching. Depositing Using chemical vapor deposition (CVD) technology, an insulating material is deposited on the wafer surface, forming a thin layer of solid material on the chip. Patterning Photolithography projects a microscopic circuit pattern on the wafer surface, which has a light-sensitive chemical like the emulsion on photographic film. It is repeated many times as each layer of the chip is built. Etching Etching removes selected material from the chip surface to create the device structures. The table below lists the required processing times and setup times at each of the steps. There is unlimited space for buffer inventory between these steps. Assume that the unit of production is a wafer, from which individual chips are cut at a later stage. Process Step Setup time (minute) Processing time (minute) Depositing 44 0.18 Patterning 30 0.27 Etching 18 0.15 a. What is the process capacity in units per hour with a batch size of 125 wafers? Note: Do not round intermediate calculations. Round your answer to 2 decimal places. Capacity units per hour b. What is the utilization of depositing if the batch size is 125 wafers? Note: Do not round intermediate calculations. Round your answer to 2 decimal places. Utilization