The figure to the right shows a fluid flow system that is designed to pump chloroform at 20C from a lower vented reservoir to an elevated vented tank; note that the drawing is not to scale as the dimensions of the reservoirs are very large relative to those of the piping system. The suction line entering the pump is specified as 5.4m of 311 " schedule 40 commercial steel pipe. The discharge exiting the pump is 118m of 21/2 " schedule 40 commercial steel pipe. The valves and fittings are installed using flanged connections. a) Calculate the vapour pressure (Pa) of chloroform at 20C using the Antoine equation. b) Calculate NPSHA for the system as shown when the flow rate of chloroform is 0.02m3/s