Use the activity file provided by the examiner and follow the instructions given You need to configure the topology as per the following instructions: 1. Configure 4 VLANs on designated switches namely, VLANIO, VLAN20, VLAN 30 and VLAN 40 2. Create trunk-ports on switches where necessary 3. Configure inter-vlan routing on routers using router on a stick method only on router 2. 4. Use static routing only between the routers 5. Configure Port-Fast where end devices are connected 6. Configure Etherchannel between 2 switches with redundant links 7. Make sure that all PCs can send and receive packets with each other. 8. Configure VTP on four switches in yellow region with 1 server (mentioned on switch) while rest of the switches should be configured with clients. Use the VTP parameters 2. VTP Domain: igra b. VTP Password: iqra123 9. Use the following IP Addresses on devices i. F200 192.168.0.1/24 ii. Fal/0 192.168.1.1/24 ii. Fa2/0.1 > 192.168.10.1/24 b. Router1 i. Fa0/192.168.0.2/24 ii. Fal/0 192.168.2.1/24 ni. Fa2/0.1 > 192.168.20.1/24 c. Router 2 i. F.00 192.168.1.2/24 ii. Fal/0 192.168.2.2/24 iii. Fa2/0.1 192.168.30.1/24 iv. Fa2/02 192.168.0.1/24 a Router 0