Use the following information to complete the exercise:

Part 1

Given the following network and IP address information, label the IP networks and all of the devices ports as needed on page 2

Site A: LAN 1, 172.18.1.0, 255.255.255.0

Site B: LAN 2, 192.168.3.0, 255.255.255.0

Connecting network: LAN 3, 10.20.30.0, 255.255.255.0

Note: Indicate Network (LAN#), IP address, and network mask for router ports and

Indicate Network (LAN#), IP address, network mask, and default route for the PC and the Server.

Part 2

Based on the addressing information above, complete the Route Table on page 3 for each router assume they are running the RIP protocol.

Routing Tables

Enter your values in the table below.

Router at Site A (10.20.30.n)			Router at Site B (10.20.30.n)
Destination Network	Subnet Mask	Next Hop	Destination Network	Subnet Mask	Next Hop
	255.255.255.0			255.255.255.0
	255.255.255.0			255.255.255.0
	255.255.255.0			255.255.255.0