Answered step by step
Verified Expert Solution
Question
1 Approved Answer
You have been given the 1 9 2 . 1 6 8 . 1 . 0 / 2 4 address space internally, and the Internet
You have been given the address space internally, and the Internet Service Provider has given you for the WAN connection. The following are the requirements:
Use a Cisco layer devices to connect to the ISP via a WAN connection connect the WAN port to the ISYS Office Switch
A default route will be needed pointing to the ISP
Use enough Cisco layer devices to service the total users.
Place the Human Resources, Engineering, and Sales into their logical areas.
Subnetting must be used.
subnets for hosts per network
Packet Tracer must have host from each department, and they must communicate with one another and the ISP Web server.
PING tofrom each host must be successful as well as PING to the ISP Web Server from each host. Also, each PC will be able to view the picture at Regentjpg
Note that, for purposes of this assignment, you only need to be able to ping from an internal host to the external address provided by the ISP. You do not need to configure any other devices outside of the Office LAN.
The attached ISYS Packet Tracer Project.pkt file is the file used to get you started in packet tracer. This file has the network setup done but is missing some of the required devices in the ISYS office. All the needed hardware is included in the ISP and Regent University networks. The ISYS office computers will need to be addressed into represented subnets.
In the packet tracer file, there are multiple areas connecting to the ISP network. The ISP network is the gateway to the Internet but you will not have to worry about the cloud connection. You will be dealing with the connectivity between the ISYS Office and the ISP. NOTE: You will not need to configure the ISP and Regent University networks.
The ISYS Office network will need a layer switch for a WAN connection to the ISP Network. You will need to design and install the ISYS Office network. A layer switch within the ISYS Office network is connected to the ISP. DO not delete this switch.
Building Network Requirements
Security
All routers and switches will use the following passwords:
Console conpass
Telnet vtypass
Enable prvpass
Create two user accounts on the routers.
User and User password is cisco both users
You will not have access to the ISP and Regent University Networks
ISP
Device
Port
VLAN
IPv
IPv
Connection
Comment
ISPLayer Switch
Fa
ISPSwitch Fa to ISPOfficeSwitch Fa
Connects to ISP Office Switch.
Giga
ISPSwitch G to Regent Switch G
Connects to Regent University Switch.
Giga
ISPSwitch G to ISYS Office Switch G
Connects to ISYS Office
Regent University Office
Device
Port
VLAN
IPv
IPv
Connection
Comment
RegentLayer Switch
G
Regent Switch G to ISPSwitch G
Connects to ISP Office Switch.
PCPhone
Fa
&
Connect to IP Phone & PC port
Printer
Fa
ISYS Office
Device
Port
VLAN
IPv
IPv
Connection
Comment
ISYS Layer Switch
G
ISYS Switch G to ISPSwitch G
Connects to ISP Switch.
NOTE: Use default routing where needed.
Passwords for routers and switches need to be encrypted. This includes the telnet, and console logins
Set Warning Message for all logins to Unauthorized Access is Strictly Prohibited!
Create two user accounts on the routers. User and User password is cisco
i just need a picture of what the outline should look like
Step by Step Solution
There are 3 Steps involved in it
Step: 1
Get Instant Access to Expert-Tailored Solutions
See step-by-step solutions with expert insights and AI powered tools for academic success
Step: 2
Step: 3
Ace Your Homework with AI
Get the answers you need in no time with our AI-driven, step-by-step assistance
Get Started