Answered step by step
Verified Expert Solution
Link Copied!

Question

1 Approved Answer

You will draw a physical and logical diagram for a network which is 4 . 4 4 . 1 2 0 . 0 / 2

You will draw a physical and logical diagram for a network which is 4.44.120.0/22.
We have 4 internal subnets at two sites. Net1 needs to support 190 hosts but may later grow to 400 hosts. Net2 needs to support 76 hosts but may later grow to 200. Net3 needs to support 14 hosts but may grow to 100 hosts. Net4 has 10 hosts but might grow to 40 hosts. We also may have unused address space You have available 4 routers.
border router (brouter) has three interfaces
se0
Gi0/0
Gi0/1
internal router 1(irouter1) has two interfaces
Gi0/0
Gi0/1
internal router 2(irouter2) has two interfaces
eth0
eth1
internal router 3(irouter3) has three interfaces
se0
gi0/0
gi0/1
You also have available any number of 8,16,32,48, and 96 port 10/100/1000 managable ethernet switches.
Your site connectes via a border router to the Internet via 6.44.1.0/30 using point to point serial interface, se0. The ISP is at 6.44.1.1 the border router address for interface se0 on that point to point is 6.44.1.2.
Site A links to Site B via 4.44.123.0/30..1 is internal 1 router at site A and .2 is internal router 3 at site B.
To do this you have decided to subnet 4.44.120.0/22 as such
64.44.120.0/23- Net1
64.44.122.0/24- Net2
64.44.123.0/30- Link from Site A to Site B
64.44.123.4/30-(reserved for future growth)
64.44.123.8/29-(reserved for future growth)
64.44.123.16/28-(reserved for future growth)
64.44.123.32/27-(reserved for future growth)
64.44.123.64/26- Net4
64.44.123.128/25- Net3
and assigned the following IP addresses to the interfaces on the four routers:
border router (brouter) has 3 interfaces
se04.44.1.2/30
Gi0/04.44.121.254/23
Gi0/14.44.123.254/25
internal router 1(irouter1) has three interfaces
se04.44.123.1/30
Gi0/04.44.121.253/23
Gi0/14.44.122.254/24
internal router 2(irouter2) has two interfaces
eth04.44.123.253/25
eth14.44.122.253/24
internal router 3(irouter3) has two interfaces used
se04.44.123.2/30
Gi0/04.44.123.126/26
The border router (brouter) has 2 ethernet interfaces. One, Gi0/0, connects to and instantiates the 4.44.120.0/23 subnet. The other, Gi0/1, connects to and instantiates the 4.44.123.128/25 subnet. It uses the address 4.44.121.254/23 for Gi0/0 and 4.44.123.254/25 for Gi0/1.
A internal router (irouter1) is connected to 4.44.120.0/23 via its interface Gi0/0 and also connects the 4.44.122.0/24 network via its interface Gi0/1. It also has a serial interface connected to site B (se0) It uses 4.44.121.253 for Gi0/0 and 4.44.122.254 for Gi0/1 and 4.44.123.1 for the se0 link.
A internal router (irouter2) is conected to both 4.44.123.128/25 via its eth0 interface and 4.44.122.0/24 via its eth1 interface. It uses 4.44.123.253 for eth0 and 4.44.122.253 for eth1.
A internal router (irouter3) is at site B and is connected to 4.44.123.64/26 via its interface Gi0/0. It also has a serial interface connected to site A (se0) It uses 4.44.123.126 for Gi0/0 and 4.44.123.2 for the se0 link.
The physical network for Net1,4.44.120.0/23, consists of a group of 548 port switches.
Switch 1- Management address 4.44.121.252
port 1- connects to brouter
port 2- connects to irouter1
port 3- connects to switch 2
port 4- connects to switch 3
port 5- connects to switch 4
port 6- connects to switch 5
port 7-48 could connect to workstations
Switch 2- Management address 4.44.121.251
port 1- connects to switch 1 port 3
port 2-48 could connect to workstations
Switch 3- Management address 4.44.121.250
port 1- connects to switch 1 port 4
port 2-48 could connect to workstations
Switch 4- Management address 4.44.121.249
port 1- connects to switch 1 port 5
port 2-48 could connect to workstations
Switch 5- Management address 4.44.121.248
port 1- connects to switch 1 port 6
port 2-48 could connect to workstations
The physical network for Net2,4.44.122.0/24, consists of two 48 port switches
Switch 1- Management address 4.44.122.252
port 1 connects to irouter1
port 2 connects to irouter2
port 3 connects to switch 2 port 1
port 4-48 could connect to workstations
Switch 2- Management address 4.44.122.251
port 1- connects to switch 1 port 3
port 2-48 could connect to workstations
The physical network for Net3,4.44.123.128/25, consists of a 24 port switch
Switch 1- Management address 4.44.123.252
port 1 connects to brouter
port 2 connects to irouter2 port 11-24 connect to workstations
The physical network for Net4,4.44.123.64/26, consists of a 24 port switch
Switch 1- Management address 4.44.123.125
port 1 connects to irouter3 gi0/0
Draw a logical diagram for the entire 4.44.120.0/22 network
Draw a physical diagram for the subnet network Net1,4.44.120.0/23

Step by Step Solution

There are 3 Steps involved in it

Step: 1

blur-text-image

Get Instant Access to Expert-Tailored Solutions

See step-by-step solutions with expert insights and AI powered tools for academic success

Step: 2

blur-text-image_2

Step: 3

blur-text-image_3

Ace Your Homework with AI

Get the answers you need in no time with our AI-driven, step-by-step assistance

Get Started

Recommended Textbook for

Database Programming With Visual Basic .NET

Authors: Carsten Thomsen

2nd Edition

1590590325, 978-1590590324

More Books

Students also viewed these Databases questions

Question

What are the basic components of an RFP?

Answered: 1 week ago