2.30. Front housings for cell phones are manufactured in an injection molding process. The time the part is allowed to cool in the mold before removal is thought to influence the occurrence of a particularly troublesome cosmetic defect, flow lines, in the finished housing. After manufacturing, the housings are inspected visually and assigned a score between 1 and 10 based on their appearance, with 10 corresponding to a perfect part and 1 corresponding to a completely defective part. An experiment was conducted using two cool-down times, 10 and 20 seconds, and 20 housings were evaluated at each level of cool-down time.

All 40 observations in this experiment were run in random order. The data are as follows.

(a) Is there evidence to support the claim that the longer cool-down time results in fewer appearance defects?
Use ( $ 0.05.

(b) What is the P-value for the test conducted in part (a)?

(c) Find a 95 percent confidence interval on the difference in means. Provide a practical interpretation of this interval.

(d) Draw dot diagrams to assist in interpreting the results from this experiment.

(e) Check the assumption of normality for the data from this experiment.

Transcribed Image Text:

10 seconds 20 seconds 1 6 9 7 156 785958 4 6 6 6 8 4 3 6 7 7 x587 365321 3 2135 5 1 23 5235