The purpose of the test setup in Figure P10-64 is to deliver damped sine pulses to the test load. The excitation comes from a 1 -Hz square wave generator. The pulse conversion circuit must deliver damped sine waveforms with \(\zeta<0.5\) and \(\omega_{0}>10 \mathrm{krad} / \mathrm{s}\) to \(50-\Omega\) and \(600-\Omega\) loads. The recommended values for the pulse conversion circuit are \(L=10 \mathrm{mH}\) and \(C=01 \mu \mathrm{F}\). Verify that the test setup meets the specifications. (Hint: compute the voltage across the load for an input signal equal to a unit step function, \(u(t)\), and then again for a negative unit step function, \(-u(t)\).\() Note that the output of a square wave generator is the\) sum of a series of step functions.