Performance Gloves, Inc. produces three sizes of sports gloves: small, medium, and large. A glove pattern is first stenciled onto leather in the Pattern Department. The stenciled patterns are then sent to the Cut and Sew Department, where the glove is cut and sewed together. Performance Gloves uses the multiple production department factory overhead rate method of allocating factory overhead costs. Its factory overhead costs were budgeted as follows: Pattern Department overhead $128,100 Cut and Sew Department overhead 210,600 Total $338,700 The direct labor estimated for each production department was as follows: Pattern Department 2,100 direct labor hours Cut and Sew Department 2,600 Total 4,700 direct labor hours Direct labor hours are used to allocate the production department overhead to the products. The direct labor hours per unit for each product for each production department were obtained from the engineering records as follows: Production Departments Small Glove Medium Glove Large Glove Pattern Department 0.04 0.05 0.06 Cut and Sew Department 0.08 0.10 0.12 Direct labor hours per unit 0.12 0.15 0.18 If required, round all per unit answers to the nearest cent. a. Determine the two production department factory overhead rates. Pattern Department $ 4.14 per dlh Cut and Sew Department $ 92 per dlh b. Use the two production department factory overhead rates to determine the factory overhead per unit for each product. Small glove $ 3.45 per unit Medium glove $ per unit Large glove $ per unit Feedback a. Calculate production department factory overhead rate for each department: Total Factory Overhead Direct Labor Hours = Department Factory Overhead Rate b. Calculate factory overhead per unit for each product: Department Rate x Direct Labor Hours per Product = Cost; Add the costs for both departments to obtain the overhead for each product unit. Learning Objective 3.