Please show all work

Question 1. Omega Tires Inc. manufactures tires for passenger cars and light trucks. Their assembly line works as follows. The first task (Task 1) is to put the inner liner (a special rubber) into the tire building machine. Next task (Task 2) is to assemble the body plies and belts, which are made from polyester and steel. Plies and belts give the tire strength and provide flexibility. The third step (Task 3 ) is to put the tread and sidewalls into position over the belt and body plies. The final assembly step (Task 4) is to press all the parts firmly together. The end result is called an uncured tire. These tasks are done sequentially. The following table shows resources and flow time for each of the tasks. (a) Driw the process map for the above process. Make sure you provide all the important information such as flow times and resources. (b) What is the capacity rate of this process? Show all your calculations and steps to justify your answer. Include all the units. (c) If the flow time of Task 2 is reduced by 40%, how will the capacity rate of this process change? Explain. (d) Suppose a new Pressing Machine is added to the assembly line, and also, a new worker, Worker 4 is hired to help Worker 2: both Worker 2 and Worker 4 work will collaborate together to complete Task 2 on each unit, and they work with the same speed. This means now together, they are able to complete Task 2 in 2.5 minutes per unit. What is the flow time of the entire process? What is the bottleneck? What is the capacity rate of the entire process? Show all your work in details, include all units, and justify all your answers